1kg 5kg 20kg 80-200 Micron Tpu Polyurethane Powder Hot Melt White DTF Powder
Activation Temperature: The activation temperature of DTF hot melt adhesive powder can vary depending on the specific formulation and manufacturer. Generally, the activation temperature ranges from around 120°C to 180°C (250°F to 356°F). It is important to follow the recommended activation temperature provided by the adhesive powder manufacturer to ensure proper bonding and avoid fabric damage.
Bond Strength: The bond strength of DTF hot melt adhesive powder depends on various factors, including the adhesive formulation, activation temperature, pressure applied, and fabric type. Different adhesive powders may offer different bond strengths, ranging from temporary bonds that can be easily repositioned to strong permanent bonds.
Washability and Care: Properly bonded DTF hot melt adhesive powder can withstand washing and regular care. However, it is advisable to follow the manufacturer's instructions regarding washing and care recommendations for the specific adhesive powder and fabric combination used.
DTF Powder For DTF Product Description
| Property | Criterion |
| Appearance | White powder |
| Composition | TPU |
| Density | 1.20±0.02 g/cm³ |
| Melt Point | 95-115 ℃ |
| Melt Index | 30±7 g/10min |
| Powder size range | 0-80 μm |
| 80-200 μm |
| 150-250 μm |
Powder For DTF Technical Parameters:
| Bonding parameters (for reference only) | Temperature | 110-130℃ |
| Press | 1.5-2.5 kg/cm2 |
| Time | 8-15 S |
| Washing Resistance | 40℃ | Excellent |
| 60℃ | General |
| 90℃ | / |
Packaging and Storage Conditions:
| Packaging | 20KG / bag, packed in PE inner bag+kraft bag |
| Storage Conditions | Stored in dry unopened packaging at room temperature for 12 months. High temperature and pressure will cause agglomeration. The trays cannot be double-pressed. |
Application of DTF Powder white powder
Fabric Preparation: Ensure that the fabric to be bonded is clean, free from any dirt, dust, or contaminants. Pre-washing the fabric may be necessary to remove any sizing or chemicals that could interfere with the adhesive bonding.
Selection of Adhesive Powder: Choose the appropriate DTF hot melt adhesive powder based on the fabric type, desired bond strength, and application method. Consider factors such as compatibility, activation temperature, and bonding properties provided by the manufacturer.
Screen Printing: Use a fine mesh screen to apply the adhesive powder onto the fabric surface, creating the desired pattern or design. Ensure even distribution of the powder.
Characteristics of hot melt adhesive powder
1.100% ink absorption rate,
2. The powder is clean,
3. The pattern is bright in color,
4. Very soft to the touch.
5. Second on-site delivery.
Why choose us
1. own factory, efficient technical equipment, several production lines
2. excellent service and short delivery times
3. we are an environmentally friendly adhesive company, to ensure the environmental performance of raw materials
4. professional R&D team, a new type of enterprise integrating production, R&D and sales
FAQ
Q1). Do you provide free sample? And how many days it will take?
Yes, we can provide 0.3-0.5kg free sample, only need you to pay the shipping cost. We will make the sample within 1- 2working days
and it will take 3-7days on the transportation.
Q2). What is your lead time?
2-7 days , depending on the quantity ,
we almost have safe stock
Product Tags:
|
|
1kg 5kg 20kg Hot Melt Powder For Dtf 80-200 Micron Images
|
